-
Hi Ron,
I'm validating correct operation of the DVBS2 code with an Opticum AX150 DVBS2 Receiver and essentially trying to emulate an Astra1 channel by going in at IF using a PlutoSDR and bypassing th…
-
Hello,
I'm planning to have a Pluto+
* Do the Pluto+ have a BiasT?
* there is the possibility to connect one antenna to TX and Rx port?
Thank's
Nir 4X6FK
-
Hey,
i tried to generate a DAB Digital Radio signal with odr-dabmod and their interface to SoapySDR.
Unfortunately it was not working because of the missing master_clock_rate interface.
Is ther…
-
Not yet documented, sorry, here is a short example to access GPS from SDR4space.lite
- You have to launch SDR4space.lite with following parameters (adapt to your setup):
````
-g, --gps arg…
-
As I really need a backup from a "virgin" Pluto Plus v2 I am writing this article in hopes someone is so kind to provide the files, thank you! (PS: It will also help you in case something goes wrong a…
-
@rgetz the newer Vivado/Vitis versions use /tools/Xilinx as prefix. I think the setup_env script should support the old `/opt/Xilinx` and the new `/tools/Xilinx` for a transition period. Will You upda…
-
Dear Jeppe, I like your waterfall implementation very much and have connected it to an FFT stream from the LimeSDR. I am struggling with the json structure required by the script, could you share that…
-
Hello,when i use grgsm_livemon catch the gsm information, i meet this error
```
/home/opensourcesdr# grgsm_livemon --arg=bladerf
Warning: failed to XInitThreads()
linux; GNU C++ version 7.3.0; Boo…
-
I have a MicroPhase ANTSDR E310 with latest firmware (e310_v1.2-dirty) .
When I tried to use ANTSDR E310 with MATLAB 2022a, I get the following error
> dev = sdrdev('AD936x');
>> dev.IPAddress …
-
Hi
500ks seems to be my pluto's limit for the settings below
![image](https://github.com/F5OEO/pluto-ori-ps/assets/26934113/f8f343ed-4509-4796-afdd-a7f06dd1af40)
after which at 1Ms the cpu usag…