-
### Describe the bug
the BMS Shows 100% on Both (LltJbd)
the VenusOS 96% and 100%
![image](https://github.com/mr-manuel/venus-os_dbus-serialbattery/assets/6553835/42a0af75-e66e-4110-9ba0-b5d480c9ec…
-
It would be incredible if you could somehow add support for Renogy BT1 Bluetooth modules. See this github link which someone has created a python script to read data from these modules.
https://gith…
-
### Describe the bug
I’m facing sporadic disconnect issues after a while (sometimes one hour, sometimes a day or a bit more). Venus OS doesn’t recognize the disconnect as values don’t get updated. Af…
-
Just realized this as I was looking into my Home assistant MQTT logs.
Got the script running every 5 mins via crontab.Polling is disabled. It seems python never exits and hammers the mqtt server (o…
-
### Describe the problem
Driver never connects to battery but does see the appropriate battery.
### Driver version
v1.3.20240705
### Venus OS device type
Raspberry Pi
### Venus OS version
v3.4…
-
### Describe the bug
**My Setup**
Victron Cerbo GX
Victron MPPT 250|100 Solar Charge Controller
Victron Multiplus-II 48/5000/70
Battery 1 - 280AH x18s LiFePo4, Daly 150A BMS, Parralel protection…
-
I found your project through your review on Amazon for the cable I bought to connect our Wanderer to a Raspberry Pi Zero 2 W.
![image](https://github.com/MaffooClock/SerialRenogy/assets/99342750/20…
-
I'm trying to recreate this to connect to Home Assistant, I know nothing about modbus.
I have this Max3232 breakout board [https://www.amazon.com/dp/B09BCKWL8V](url)
and ESP32
I have swapped …
-
### Describe the problem
Dbus-serialbattery seems to start correctly, appears in remote console, communication to Jkbms occurs, but appears skipped because no device instance.
![image](https://g…
-
I was able to pull data from my DCC50S via the Renogy hub on ID 96. Perhaps this is different between the DCC controllers and the Rover controllers? Might be worth mentioning in the readme.