-
### Describe the issue you are experiencing
wenn ich versuche den status des HMIP-RGBW LED Controller zu verändern funktionieren die kanäle soweit gut. ich kann level und hue ansprechen. allerdings…
-
**Describe the bug**
It's not longer possible to edit groups if there is a new device in the inbox. Web-UI is freezing during device configuration. Seams to be a re-bug of #945
**Steps to rep…
-
Hallo, ich habe ein ähnliches Problem wie hier #484 . Ich hatte auch versehentlich da gepostet. Zu spät gesehen dass schon auf closed.
Also bei mir genauso. Raspi geupdatet, danach kein pivccu mehr…
-
### Describe the issue you are experiencing
Ich habe RaspberryMatic als LXC mittels `install-lxc.sh` auf einem Pi5B-8GB mit RaspberryPi-OS (`Linux Pi5-8GB-PiOS 6.6.31+rpt-rpi-2712 #1 SMP PREEMPT Debi…
-
Hello!
First off, thanks for this project! I've written my own version of the TX side from the ground up to use the FIFO buffers on the si4463, eliminating the RS232 overhead. I've also slightly mo…
-
When trying to build the module driver (5.6.4.2 branch) on rasbperry pi 3 b+, dkms fails with error 7.
It seems the module is simply not there when the make command finishes. Or **under the incorre…
-
### I agree to the following
- [X] I have read the [documentation](https://github.com/danielperna84/custom_homematic#custom_homematic) right now
- [X] I have read the [FAQs](https://github.com/daniel…
-
Hallo, ich habe jetzt nach dieser Anleitung installiert ( https://github.com/alexreinert/piVCCU/blob/master/docs/setup/raspberrypi.md ) und Punkt 4-5 und Punkt 6 Option 2 ausgelassen. Punkt 7 ausgelas…
-
Hi, I can't locate another contact method to obtain hardware support for a PiFace-RTC, so I am posting here. I have been unsuccessful in getting mine to function, most recently attempted on latest ras…
-
_From @lampi87 on January 21, 2018 16:6_
Hello,
after OpenHAB2 restart I get an error in my logfiles
```
[WARN ] [matic.handler.HomematicBridgeHandler] - Unable to load RSSI values from bridge '…