-
Please add in __init__.py support for a crystal oscillator running at 12Mhz.
I would like to use on a [WaveShare RP2040-PiZero](https://circuitpython.org/board/waveshare_rp2040_pizero/) with a [Wa…
srolf updated
4 weeks ago
-
Hi,
node-modbus-serial works only when baudRate is 9600.
When I change it to 19200 or 115200 - it does not work :(
It is very important for my project. Serial port is working with my NFC card rea…
-
Is NibePi compatible with one, and only one type of RS485 HAT? Or could this be used: https://www.amazon.se/IBest-RS485-l%C3%A5ngdistanskommunikation-CAN-Module/dp/B07PQJMFVP/ref=sr_1_6?keywords=rs485…
-
My charging is interrupted several times and I suspect this to be a unstable RS485 connection.
3 pcs TWCgen2 chargers are connected together to a RS485-to-ethernet device, (WuT COMserver).
In the lo…
-
This is my RS485 config on boneblack.
`&am33xx_pinmux {
uart1_pins: uart1_pins {
pinctrl-single,pins = <
0x178 (PIN_OUTPUT…
-
Hello...
My name is Chris from Indonesia.
I would like to ask is it possible to use RS 485 port in openCR 1.0 board to control another device beside dynamixel. I have BLDC motor controller need to b…
-
from @pooledge:
I am using RS485 for communication between Arduino and host computer. My RS485 is half-duplex, therefore readout/writing is possible only on demand.
Now I'd like to use one of the pi…
-
## libmodbus version
all
## OS and/or distribution
OpenWrt 21.02, Linux 5.4
## Environment
arm 32-bit
sc16is752 UART
## Description
It is not enough to to set the SER_RS485…
-
### Describe the bug
Unsure where the issue lies (hardware, kernel or pyserial), but the RTS pin on the RPI seems to be able to get locked into a state that can only be recovered from by rebooting.
…
-
On the product I bought, R413D08, USB to RS485/RS232, I have put in several hours now, and the lack of documentation is shocking.
Questions for this product :
1. As it has 8 outputs for control…