-
**Describe the bug**
4.800 Wh in sum at 100% but EnergyWhMax always resets to some value around 3xxx Wh when charging is reached at 100%.
Btw - what's the difference to EnergyWh?
**Expected b…
-
Hi,
it seems the values delivered from the Zendure API for "SolarFlow Pack Input Power" and "SolarFlow Pack Output Power" are inverted.
Input seems to be put going from the batterie and out power se…
-
I still have disconnection errors with 1.6.7 on a regular basis several times a day.
Adapter goes red and has to be manually restarted.
-
Hallo,
Do I need the solarflow-bt-manager only to disconnect(or connect) your SF Hub from(to) the cloud or even to receive the mqtt-messages to my iobrocker?
Or is the communication between HUB200…
joe63 updated
4 months ago
-
Moin,
bei mir mit einem Tasmota Sensor der via template Sensor erzeugt wir, da funktioniert das nicht.
muss der Wert in kW oder W sein? Und muss der negativ sein? Oder darf nur größer 0 Einspeisu…
-
Hi guys,
i have build a blockly script which sets the "minSoc" value to 50. Sadly when i check in the Zendure App its still set at 10 and also at ioBroker ill see the value set to 10 again.
Cant…
-
I have been using my Hub1200 / "old" hub in offline mode = my own MQTT broker for some time. This works well, also taking it back to the Zendure MQTT and to any MQTT broker works fine.
I recently a…
-
Hey Reinhard,
big thanks for your work.
Could you help me with integrating shellypro3em, I think the problem is other json output format from shelly to mqtt.
Here some sample outputs from mqt…
-
Version 0.62
I'm not very good at coding, have you considered that the efficiency calculation or transmission by in opendtu / Hoymiles in connection with solarflow hub are partly not valid ?
I see i…
ghost updated
3 months ago
-
Hi,
It would be great to have a MQTT command, which disables/enables the control logic of SF-control.
My use case:
I want to keep my feed to the grid at max 800W (max-inverter-limit) at all times…