-
NEW GOTEK with AT32F415CBT7
Over the past few months, because the price of ST chip(STM32F105RBT6 Cortex-M3) has increased greatly, and We're running out of stock, we have changed the design…
-
I transplanted ThreadX+USBX CDC Device on STM32F105, and then I used the serial debugging assistant to send data to VCOM. When the cumulative amount of data sent exceeds 500 bytes, it will malfunction…
-
I have successfully ported ThreadX and USBX to STM32F105, and USBX HID can work normally. When I try to use USBX CDC ACM, the problem occurs. There is VCOM virtualized by STM32 in the device manager o…
-
I have successfully run the ThreadX+USBX program on the STM32H7 chip. The USB composite device (CDC ACM+HID) is used, so I tried to implement the same function on STM32F105RBT6, but I ran into trouble…
-
I am considering the possiblity of putting candleLight on a board with STM32F105RBT6 and two tranceivers and, knowing of the incompatibilty with STM32F103, I am wondering if the same kind of issues st…
-
**Describe the set-up**
* The board: A custom STM32F105RCT6 development board from Taobao. board description (website in Chinese): https://item.taobao.com/item.htm?id=556036697936 . I can upload the…
-
I've purchased a refurbished Gotek from Amazon and it came with an STM32 chip but it seems defective.
I happen to have a spare LQFP STM32F103 chip on hand.
Does anybody know if I can replace the…
-
I design hardware and am not really a software person. I noticed that in the sapog chibos it has code for the f4 series. How compatible is that? Do you know if there is a plug and play stm32f40x?
-
I was not sure, if was going nuts till I discovered, that a vendor delievered a Gotek to me with a AT32F415RCT7 chip, instead of the normal used STM32F105. A user on Facebook mentioned that STM is hav…
-
[Moved to a new issue]
Hi !
I use on my all Gotek HXC and FF firmware.
Recently I order 2 Goteks with AT32F415CBT7
First, I try to use it with FF last version (so 3.28 and tested also beta 4)
N…
ghost updated
3 years ago