-
Trying to set up the SFS V2.0 on an SKR Mini E3 V3 and not sure of the wiring. The manual has the wiring from the SFS going to 2 pins on the E0DET and to 2 pins on the E1DET plugs and the SKR Mini E3 …
-
I normally see the list of MCU's searching for new and interesting strange parts...
While doing that I stumped on another part that have a similar name:
APM32F003F6P6
Here is the link:
https://www…
-
## Summary
I get consistent crashes while testing apps/examples/timer with disabled CONFIG_FRAME_POINTERS.
With them enabled, it works, but .text consumes +4.5KiB flash.
## Impact
armv6-m thumb …
-
Hi project authors, I am currently considering customising the purchased Dragino LSN50 v2 LoRa node. The link in README.md directing to the page showing how to use the source code is no longer unavail…
-
Hello,
as the E-mail address in commits is probably not working and I was not able to contact repo owner directly, I attach here just a small update for potential additional reverse engineering:
1. …
-
Recently i bought the BTT SKR E3 mini V3 and a BTT mini 12864 V2.0 display
[https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v2.0](BTT mini 12864 V2.0). Not the best decision, but don…
-
### Configuration
**Operating system**: Windows 11
**PlatformIO Version** (`platformio --version`): Core 6.1.16 - Home 3.4.4
### Description of problem
When I open my 3D print Marlin proj…
-
Folks,
I bought a SKR MINI E3 V3.0 and I'm having problems with the FANS ....
What is the correct connection to make on this card?
I currently used the following connection without success:
FAN0…
-
-
### Description
I've built a toy project (CubeMX generated) which uses UART4 to print out "Hello World" to uart. I've been trying to emulate it using renode, but I've run into issues regarding clock …