dragino LoRa_STM32 issues

dragino / LoRa_STM32

Source code for Dragino LoRa module base on STM32 Chip

77 stars 77 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

printf with small font size freezing a board?

#22 mozsaf opened 1 year ago
0
How to upload the source code to a LSN50 v2 LoRa node and how to properly import the source code to STM32CubeIDE?

#21 MinhPham123456789 opened 2 years ago
11
Ingredion

#20 arturgussi closed 2 years ago
0
AT+INTMOD=x causes WD reset - FIXED

#19 ehogeweg opened 2 years ago
0
DS18B20 1-Wire with longer cable is not working

#18 themuck opened 3 years ago
2
Build with STM32CubeIDE

#17 cthil opened 3 years ago
8
Firmware shamelessly draining battery when using DS18B20

#16 fabiengagne closed 3 years ago
2
Developments for new sensors

#15 jajberni opened 3 years ago
4
Validate DS18B20 CRC

#14 martenjacobs opened 3 years ago
0
DS18B20 reports 0ºC when unable to read

#13 martenjacobs opened 3 years ago
0
Change default region and customizing payload data

#12 nurhazbiy opened 3 years ago
0
Not an issue, but a question; Wakeup reason in main.c

#11 PeteMilligan99 opened 4 years ago
0
AU915 Channel selection not working

#10 takenalias closed 4 years ago
2
Digital interrupt: door closed to many payload uplinks

#9 mukrog opened 4 years ago
1
can't connect/join the dragino LG01-N with ST AT command region AS923

#8 floflofloflo opened 5 years ago
0
Ver 1.5 AT+CHE=2 not setting the correct sub band uplink channels

#7 gfnord opened 5 years ago
1
Provided EU868.hex v1.5 for LSN50 sends messages without payload

#6 ahabe closed 5 years ago
1
AT commads stoped working

#5 phisch92 opened 5 years ago
0
is there an alternative compiler to keil?

#4 phisch92 closed 6 years ago
3
Current_version

#3 goodcheney closed 6 years ago
0
Sw4STM32

#2 henri98 closed 6 years ago
1
The DS18B20 temperature conversion looses the sign before LORAWan send message

#1 silvanoAdami closed 6 years ago
3