-
I followed the Serial programming instructions, however I am trying to use the CP2102 (its what I currently have in hand). I set the baud rate 57600, and wired according to the schematic you provided.…
-
ATtiny104 Xplained Nano
I have this card, can I program it with attiny core?
How should I configure this card?
Which mcu supports attiny? is there a list of all supported mcus?
-
First of all really appreciate the time and effort that you put into this core, i'm truly thankful.
All worked as expected, until I tried to select AVR128DB64(for the first time, 99% rest of the ti…
-
I am working on automating interrupts with time interval. I found that TimerOne is a good library for it but it is not working with Atmega 4809. Here is link to the library (https://github.com/PaulSto…
-
Hi,
did you change anything else on the OneWire or Pin Lib between Core 1.5.1 and 1.5.6?
With v1.5.1 the address from the DS18B20 sensor is found and with v1.5.6. not. Nothing changes on any other…
-
So I installed the library thought the IDE but when I got to compile it gives me these errors. Ive installed the Attiny85 boards files from here https://create.arduino.cc/projecthub/arjun/programming-…
-
The Arduino cryptography library (https://github.com/rweather/arduinolibs/tree/master/libraries/Crypto) says that it should work with all Arduino devices. I've used it with many different devices and …
-
Hello everyone,
in the avrdude.conf (release v7.0) the memory size and page size usersig/userrow is wrong, it should be 64B and not 32B.
The relevant parts in the datasheet (page 17) is this:
>…
-
1.6.2 is ready for release as soon as I can get a fix to the asm rx implementations working,
Two tinyAVR 2 series in half duplex mode each running this identical sketch:
```c++
void setup() {
…
-
Hello SpenceKonde,
I tried to clone this repository (which is a submodule in my repo) and found out that you suddenly renamed the master branch to a new and _very_ extensive name. That's well and a…