-
Hi,
I've installed mongo-explorer as a docker compose. This is the yaml file:
```
services:
backend:
container_name: mongoeplorer_backend
build:
context: ./image/backend
…
-
Any luck getting OctoPrint controlling a tinyg? I'm seeing the output in 'terminal' when I issue commands by echoing directly over usb, but octoprint sticks at 'connecting.'
-
#### Description
I have upgraded CNCjs from 1.9.13 to 1.10.1 and upgraded my TinyG v8 with recommended firmware build 449.01.
After setting back all parameters on the TinyG, I still have a problem…
-
### Version
2.1.3
### Hardware / Firmware
TinyG
### What happened
When running the Z probe module, my CNC appears to correctly interpret the `G38.2 Z-20 F100` command and lowers Z until…
-
Generally, Spindles take some accelerating time to reach the rpm desired, after sending M03 or M04 the controller starts immediately the next move even if the spindle does not reach the speed, this ma…
-
Greetings. As a means of saying thanks, I have edited the tinyGS Wiki FAQ. I've created https://github.com/jbgreer/tinyGS.Wiki and edited the FAQ; I don't seem to be able to perform a pull request…
-
#### Description
Is it possible to use a macro or some startup script to set the settings in Tinyg?
Here are all the settings I need for my machine
{1tr:1.75}
{2tr:1.75}
{4tr:1.75}
{2po:1}
{…
-
Hi all,
Has anyone caught a problem if tinyg is not connected during RPI boot. RPI doesn't boot. SSH server doesn't start properly so I cannot connect remotly. Even if i connect it directly to moni…
-
A TinyG board with firmware build 440.20 and firmware version 0.97 reportes `err: M code unsupported: M115` when I send this code using a terminal. Same for M114.
These M codes are supposed to be sup…
-
Can someone add some pictures of the Boards?
I do have two versions of TTGO T-beam one with a mechanical switch and one with a single press switch.
Don´t really know which one is which....
Tha…