-
Buena noche, tengo una placa skr v1.3, en los ejes XYZ tengo tmc2130spi y en el extrusor tengo un tmc2208uart. El problema es que configuro en VSCODE, en la placa coloco los jumpers en los pines que s…
-
I am running the SKR v1.4 (non-turbo) and TMC2208 3.0 drivers. I am having trouble getting any response from my extruder The motor locks when motors are enabled, but I can't get any extrusion or ret…
-
Hi
I have an SKR 1.4 Turbo. I've installed TMC2208 driver (UART mode) in X, Y, Z axis (this works) and i have tested A4988 (motor is stuttlering and dont change direction), DRV8825 driver (motor do…
-
Hi everyone,
Today i problem with board BIGTREETECH-SKR-V1.3
i change or replace new TMC2208 but not work.
The error “tmc connection error”
This is video error
https://www.youtube.com/wa…
-
Mks Robin2 problems:
1. Printing via USB is not working properly. It is stopping same location even if you restart the printer.
2. While printing circles lot of click noise is observed from motors.
…
-
I tried to compile this sample in order to test the UART mode connection. It turns out it fails to compile and shows a number of issues:
- `STEP_PORT` is not defined, I'd be nice to have a comment …
-
Hello,
I have a version with TMC2208. Firmawre version 17.
When I change the steps per mm on the y axis and increase this value the displacement of this axis is not more important. On the X axis…
-
### Bug Description
Configuring for LK5 Pro.
1) In the support LKx Pro branch, in the default/example configuration.h, line 150, #define SERIAL_PORT 0 generates a compile error. Changing the 0 t…
-
I'm encountering an `MCU Protocol Error` when adding custom configuration sections to my Klipper configuration file. The specific error I receive is:
MCU Protocol error
This is frequently caus…
-
### Bulging approximately from the 6th layer
### Steps to Reproduce
I made some upgrades to my Anycubic I3 Mega Pro:
1. Self-printed [Anycubic i3 Mega X-Carriage [MK4]](https://www.…