-
I'm struggling with setting up an RTK solution for Pixhawk.
Please help!
This is my config:
BASE:
U-blox NEO M8T (NEO-M8T Time & RAW Triple Band +HMC5983 Tallysman TW2710 for RTK)
Setup in U-center se…
-
Today
Finally i got success to run Sandeepmistry on NRF52840 u-blox module :)
If someone is interested, i can send the package
-
Was the I2C compatibility pull request incorporated in the library? If so, is there an example? I would like to use a U-Blox module with I2C.
How would using I2C efficiency compare to the other s…
-
https://store.arduino.cc/usa/nano-33-iot
The Arduino Nano 33 IoT is a low-cost Arduino board with a SAMD21 host processor and U-Blox NINA modem. The firmware is [custom](https://github.com/arduino/…
-
hello im having trouble getting this shield connected to blynk. I uploaded and successfully connected the shield to hologram using the 00_Register_Operator sketch. On tinyGSM wiki it says that my mod…
-
If I use default ( gps only) config everything work on the galactic branch.
zed_f9p.yaml
gnss:
glonass: True
When I enable glonass I get this error.
`[ublox_gps_node-1] [DEBUG] [16…
-
### Is your feature request related to a problem? Please describe
-
### Describe the solution you'd like
feature request for BETAFLIGHT to support ublox ZED-F9P GPS module.
this multi-band recei…
-
**IF YOU DON'T REMOVE THESE FOUR LINES, THEN YOUR REPORT WILL BE CLOSED AUTOMATICALLY**
Questions and user problems should be directed at the forum (http://discuss.ardupilot.org)
ublox GPS reports…
-
I am a coding novice. Please add a parser for $GPZDA. I am building a precision GPS Clock using an U-Blox NEO-M8N GPS Clone on a PIC18F4550 MCU with a 2004 HD44780 LCD Display. Thank you for your help…
-
The next GPS rollover is in 2019, which isn't that far away and likely in the lifetime of current receivers.
The cause is that GPS WN is broadcast to 10 bits so is mod 1024 of the real WN, which is c…