-
**Description:**
I am in the process to convert ESB-style maven-car-plugin projects to its vscode-plugin counterparts. Building with the vscode plugin is much faster and thus we are converting.
We r…
-
UBL is another invoice standard, besides Factur-x and Zugferd. It's quite popular in the US and outside of Europe.
The specification (sample XML) can be found [here](http://docs.oasis-open.org/ubl/…
-
Create a .ipynb file with an example showing the calculation of:
- SAF dispersion, group velocity, compare with MuMax and experiment (uBLS)
- SAF hysteresis loop, compare with experiment (Kerr)
- ?…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Hello, I read through a post and then downloaded your firmware. I then entered the command C104 …
-
Hello
I have an non working HDMI module from an early Inspire1 Remote
Which was long not used and so NAND run full of bad blocks. Was my First thought.
Board is labeled "WM610_GRCP_MFI368_V1"
…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
On the newest firmware after the first layer the nozzle temp drops from 205° to 198.xx° C (Shoul…
-
### Description
The bed geometry can change with different temperatures. You can create multiple meshes, in let's say 10C increments. If you want to use a different mesh, you have to manually cho…
-
Hallo Jochen Staerk @jstaerk,
ich habe den Validator auf der [zugferd-community Seite](https://www.zugferd-community.net/de/dashboard/validation) genutzt. Dort gibt es noch den Verweis auf das obso…
-
10 minutes in the bed heater turns off. This is a self reminder to fix.
-
### Description
I upgraded my CR-10S Pro with a BLTouch to 7.4 using 10SPro_BLT_UBL_DW7.4.hex and TM3D_DWINCombinedScreens_V4.7z
When auto leveling the probe does not probe in sequence and the…