-
**Describe the feature**
I would like support for a Roland V-1HD Video Switcher, if possible, on an Elgato StreamDeck. Mainly to control the fade types and to change cameras from A to B or B to …
-
```
Setup scripts have been created for usb cameras, but network cameras will
require different steps.
1. Identify and script setup steps for new network cameras, using the
calibration procedure cu…
-
I would like to preface this with a bit of information about the setup.
- There are 2 cameras attached to the Raspberry Pi 3B+, one is a USB webcam, the other is a Raspberry Pi Camera Model 2 (CS…
-
### Describe the problem you are having
I have two docker hosts and both have a coral. I find that Frigate seems to cause the whole host to freeze completely (console is not responsive) at frequent …
-
My Kids are doing line following but they are constantly getting an error
```
Exception in thread Thread-7:
Traceback (most recent call last):
File "/usr/lib/python3.9/threading.py", line 954,…
-
```
Setup scripts have been created for usb cameras, but network cameras will
require different steps.
1. Identify and script setup steps for new network cameras, using the
calibration procedure cu…
-
I am experiencing the following issue:
When I try to activate gphoto2 --capture-tethered, the camera does not save the images to the card, which starts blinking. The photos remain in a "saving" sta…
-
**Is your feature request related to a problem? Please describe.**
If you enter a bad calibration, and don't have the time to re-calibrate the camera, there is no easy way to get rid of that calibrat…
-
I would like to add USB Webcam support to Riot. I have checked out the source, and started to analyse it.
I have not found the proper entry points yet...where does the camera magic happen?
Could som…
-
I want to use ptpy to communicate with my Sequoia. When I plug the sequoia into my Mac via USB and run the example, `python ./trigger.py`, I get a `ptpy.ptp.PTPError`:
```
E 439 ptpy.transports…