-
These modules (from non-stock mods) should be added to section of moduleAttributeList.xml by default
```
```
-
```
Which board (stock / gruvin9x / sky9x / Taranis) are you using?
Taranis
Hello Bernet,
the Vario tone of Taranis goes from min. 640Hz over 1000Hz at 0m/s to max.
2000Hz. Correct? It sounds good.
…
-
```
Which board (stock / gruvin9x / sky9x / Taranis) are you using?
Taranis
Hello Bernet,
the Vario tone of Taranis goes from min. 640Hz over 1000Hz at 0m/s to max.
2000Hz. Correct? It sounds good.
…
-
```
Which board (stock / gruvin9x / sky9x / Taranis) are you using?
Taranis
Hello Bernet,
the Vario tone of Taranis goes from min. 640Hz over 1000Hz at 0m/s to max.
2000Hz. Correct? It sounds good.
…
-
Hi,
do you have a tip on how to calibrate the MPU9250 Accelerometer on the M0 branch. I have got the sketch up and running on an Arduino Zero without an SD Card (btw. in the code VarioSettings GnuSet…
-
Main Rx = Archer SR8 Pro on 2.1.14
Radio X20 Pro on Ethos 1.5.7
On April 26 I was using an Archer SR8 Pro when a failsafe occurred on turn to final about 50m away 10m high. The problem started at …
-
Hi, please update the readme file. There is no documentation on how to calibrate the magnetometer without an SD card. I tried to update my simple vario with the BMP280/MPU9250 with your latest updates…
-
http://blueflyvario.blogspot.com/2012/09/calculating-wind-speed-from-gps-track.html
Chernov algorithm https://github.com/mdoube/BoneJ/blob/master/src/org/doube/geometry/FitCircle.java
-
Hi,
Thank you for this fantastic SDK!
I make a paragliding variometer for me and I noticed a mistake for the temperature in the source code.
Basically the temperature must be int8_t everywhere…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
The Alt valu…