-
Hi, on page 140 in the Manual it should be a M3x30 SHCS in the top: https://raw.githubusercontent.com/VoronDesign/Voron-2/Voron2.4/Manual/Assembly_Manual_2.4r2.pdf
The M3x40 is too long an is exposed…
Flol0 updated
6 months ago
-
Version2.4
Device name Reinheitsgebot
Processor AMD Ryzen 7 5700U with Radeon Graphics 1.80 GHz
Installed RAM 12.0 GB (9.85 GB usable)
Device ID CDA427D2-B209-407A-97E4-DC34BABCB0A2
…
-
Assembly Manual Page 97 Right XY joint has circle on the wrong M5 hole
in the Voron-2.4 R2 assembly manual, version 2022-07-04
https://raw.githubusercontent.com/VoronDesign/Voron-2/Voron2.4/Manua…
-
I'm building my Voron V2.4 based on Octopus Pro (STM32F446). According to the wiring doc (https://docs.vorondesign.com/build/electrical/v2_octopus_wiring.html), I connected my hot-end heater to the `H…
-
In the Printed Parts Guide, the STL link for the T8_Nut_Block_x1 is incorrect.
It's linking to:
https://github.com/VoronDesign/Voron-0/blob/Voron0.2r8/STLs/T8_Nut_Block_x1.stl
Instead of:
…
-
In the PDF docs on page 120, in a caption about premade cables there is filler text instead of a description of the cables.
The filler text is
> Uptis velicatur sequam sunte
> voloresed magnisi…
-
“You can use an M3 fastener to temporarily fix them in place and prevent **the** from sliding out of the slot.“
On a related note, any plans to make the docs source open? Is there a way to contribu…
-
![v0 2r1-p231](https://github.com/VoronDesign/Voron-0/assets/65358226/499d1b00-b472-4242-be1c-1536bd9052d3)
-
**OBSERVED**: On page 110 of the SW assembly manual, 2 SCHS bolts are required to set the display in place. 2 bolts are shown but no details are given
**EXPECTED**: Bolts should be labeled **M3x16 …
-
As the title suggest, I think a solution for RGB NeoPixels mounting instead of sequins leds would benefit the community.
shkup updated
8 months ago