-
migrate from vs1053 to pcm5102
has pcm5102 white noise?
-
Just built this radio and it works flawlessly! As a finishing touch, I would like to add two small oled displays for emulating analog vu meters. I'm already using a second (serial connected) Esp for d…
-
trying to use this with a custom set of spi pins but it dosnt work on an esp32. if i change the board pin definitons for the spi pins then it works.
-
I've been using the VS1003b and VS1053b for a bunch of different 328 projects since they are really flexible. Midi stuff 'just works'. But simple PCM output, I'm stuck at feeding from the mozzi outpu…
-
Big thanks for your work! Its perfectly!
You made cool module Audio i2s. In this solution have cool methods: duration of mp3 file and seek positions in secons.
This module dont have a this metho…
-
I have the same problems with the VS1053 Board and the VUmeter not working. I have checked triple times the connections
and the meter is still not working, only showing up for a short glitch after …
-
I was wondering if the project is till being supported. I added the library to a blank project in the Particle Web IDE and tried to compile but received the following error:
lib/Adafruit_VS1053_Ph…
-
Hi all,
My Web radio is now running well, with a really good sound thru headphones at a 192kbps stream.
Before integrating a 2.8" Touch screen, I just test it on a 2.1 loud speaker sound set.
I fe…
-
Hi all,
Have been using this VS1053/VS1003 unit in my older Esp8266 setup and it was working good.
Now in my new Esp32 setup everything seems to be working ok BUT no sound.
In my serial printout …
-
First of all *THANK YOU* for being the only guy on the internet who switches the VS1053 from MIDI mode to MP3 mode in his driver. You wouldn't believe how many days I wasted until I found your code!!!…