-
It is my understanding that Antmicro want to support the ZCU10[45] dev boards.
* [ZCU104](https://www.xilinx.com/products/boards-and-kits/zcu104.html) - Zynq UltraScale+ XCZU7EV-2FFVC1156 MPSoC
…
-
Dear,
This is the error I am encountering while make process.
I checked everything and think all are fine. But could find out the exact reseason for this
make
g++ -Wall -O2 -g -MMD -I /usr/local…
-
It appears we don't have any examples / demos which run on Zynq parts at the moment?
I don't know which board should be targeted?
-
Hi,
Can I run use this project with Zynq 7z020 FpGA with PL alone ? I read Artix-7 is the same fabric used in Zynq 7k FPGA and I have one readily available
Thanks
-
Hi,
I downloaded this pre-built and put it on a SD card, and insert the card into ZYBO board. Once I connect the board via the serial port and open a terminal (putty), I can see the "PetaLinux" log…
-
hello,看了您的代码和论文,想用在zynq 系列芯片上。
主要问题是 zynq 系列芯片,xdma 的h2c/c2h通道数每个方向只有2个。
想了解一下,修改dma 通道数,是否好修改。
-
I've been following the Zynq-7000 SoC Embedded Design Tutorial (2023.2) using a Digilent Zybo Z7-20. The cdma-app showed FAIL even though the DMA transfer occurred (I used the Memory inspector to re…
-
On which board this code is targeted.........?
ultrascale zynq or only zynq..........?
-
LK"I
Hi ,
Is this repository supports ZCUxx chips?
like you described here (just replace the Zynq base release with 2018.1-zcu106-release.tar.xz :
[https://www.digikey.com/eewiki/display/li…
-
Platform defining:
Take LiteX -> Read run instruction -> build ready-design for Arty board (using arty.py) -> try to build it on Zynq -> copy Arty definition and arrange it for our board* (don't forg…