-
```
Sometimes I get an unrealistic high RPM reading for one of the fans and that
becomes the Max value until I reset Max. It would be nice if polled RPM sample
beyond 25% change from previous polle…
-
```
Sometimes I get an unrealistic high RPM reading for one of the fans and that
becomes the Max value until I reset Max. It would be nice if polled RPM sample
beyond 25% change from previous polle…
-
Hey family,
I believe disconnected pump / no CGM with stick functionality could be improved.
It would be more helpful if clicking 'disconnect pump', ALSO:
1) Set TBR = 0 (this I believe curr…
-
Need to translate the pvRequest 'fields' sub-struct into a BitSet and use it to mask out Monitor updates. This will all a client to monitor part of a structure (eg. alarm but not value).
-
```
Currently the alarm time out must be configured.
I tend to snooze A LOT so I pass even the 60 minutes that is the maximum that
can be set.
An option to disable this feature completely would be gr…
-
Final goal: I'm trying to make my MG5050 work with homekit
I'm using Windows 10 and my computer is not on the same network as the alarm system (which is in another house)
I've downloaded this ht…
-
### Type of request
Existing device improvement
### Meter description
Add support for new BMT Hydrodigit water meter version: type 0x07, version 0x17.
Driver auto detection suggests to use…
-
```
What steps will reproduce the problem?
1. Start GPS tracker
2. enter "Tracking control" menu
3. GPS icon dissapears
4. exit menu
5. GPS icon appears again but gps has no fix
1. Start tracking.
2…
-
```
What steps will reproduce the problem?
1. Start GPS tracker
2. enter "Tracking control" menu
3. GPS icon dissapears
4. exit menu
5. GPS icon appears again but gps has no fix
1. Start tracking.
2…
-
```
What steps will reproduce the problem?
1. Start GPS tracker
2. enter "Tracking control" menu
3. GPS icon dissapears
4. exit menu
5. GPS icon appears again but gps has no fix
1. Start tracking.
2…