-
## 詳細
SILSを回す際、RWでfault statusを読み出すとCRCエラーが発生する。
rw0003.cppで `WriteFloatTlm(kReadAddressFaultState_, (float)fault_state_);` を追記すると、fault statusに対応するテレメがRW模擬アドレスに用意されるようになり、fault statusに対するCRCエラーはなくな…
-
Creates a storm portal for 20 seconds. If two portals are active, those approaching either get warped across and take TDB damage to health and mana.
- Cast Time:
- Mana:
- Duration:
- Acquisition:…
-
Hi, How would I optimize chisel to be fast on high-speed high-latency scenarios? Currently, it can't fully utilize the bandwidth. Thanks.
-
Foundry isn't applying any of the penalties for encumbrance. The character sheet keeps track of your current carried Bulk, and the maximum, but it doesn't do anything when you go over the thresholds.
…
-
Currently we need to break up a move to straight into small movements and each of those has a trapezoidal speed profile.
If we wanted true control of the speed and position while moving in a strai…
-
### What is the issue?
Quite a lot of entries in syslog
```
2024-10-04T10:21:54.846867-07:00 moorea-S3 tailscaled[1124]: open-conn-track: timeout opening (TCP 100.96.229.119:38002 => 185.125.190.96…
-
Hello,
i can't the install this AddOn on
my system.
```
inxi -Fz
System:
Kernel: 6.9.12-3-MANJARO arch: x86_64 bits: 64
Desktop: Xfce v: 4.18.1 Distro: Manjaro Linux
Machine:
Type: …
-
-
The side fan of my Creality K1 does not spin down to its regular speed after a bridge / overhang has been printed.
The model fan and the side fan both spin up and the model fan spins down to its regu…
-
Commenting out this line https://github.com/neggles/linux-quartz64/blob/linux-quartz64/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts#L323 seems required for certain high speed SD cards to work (…