-
The preview of the layers in Slic3r's GUI show what appear to be correct walls but the Gcode generated jumps around and skips sections. Use print settings Simple (bracelet), Filament: Taulman 618 Nyl…
-
There is no option for setting the brim distance. Printing the brim lets say 0.1mm away from the object (and maybe use some rigid filling) would make it easier to remove the brim from the finished obj…
-
1.2.0-exp trying to print 50mm Bridge Torture Test from Thingiverse:
http://www.thingiverse.com/thing:12925
Unlike in 0.9.9, Slic3r correctly detects the perimeters that are part of the bridge, and u…
-
I'm slicing for a 0.80 mm nozzle. If I have a custom extrusion width of 1.0 mm a 2.1 mm ring has 2 perimeters. In the upper cylinder portion of the model there's a small gap but it works. If I change …
-
Windows 7 64-bit
Slic3r 1.2.2-dev (Updated 2014-12-07th)
http://a4jp.com/3d-files/bugs/2014-12-08th-9-04-am-for-github-config.ini
http://a4jp.com/3d-files/bugs/block.stl
The skirt preview is missing…
-
Current GCode export method sometimes takes forever when there are many islands in the input. Please correct me if I am wrong, this is the pseudo code of current flow of perimeter generation:
```
// …
-
While printing a cylinder with Slic3r 0.9.10b's spiral vase function I noticed my printer starting and stopping some times where the layer change would have been.
Turns out there are some gaps, and on…
blddk updated
6 years ago
-
This causes a flicker effect and in the worst case an infinite loop (only way to escape is by jumping).
The two root causes:
PlanetariaRigidbody.position is set without setting PlanetariaTransform…
-
I'm consistently having a really wierd slic3r issue on sharp corners. Slic3r will add little bits extruding from the corner only on some layers - see here:
![image](https://cloud.githubusercontent.c…
-
#### If this is a feature request describe it here
FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: 0.3.1
#### Version of OctoPrint
OctoPrin…