-
The Sonoff micro USB is a single channel device but it adds to Homebridge as 4 channels, this is incorrect and it should only add 1 channel.
-
I flashed one sonoff basic r3 with the RavenCore 1.0 release. All process was looking ok, but after finished the device didn't do anything more. No lights at all, also removing the Diy Mode jumper.
…
-
| Название | Значение |
|---|---|
| __Производитель__ | SONOFF |
| __Модель__ | ZBMINIR2 |
| __WEB Build__ | 1.5.11 |
| __API Build__ | 1.10.2 (12797) |
| __Шаблоны__ | 4392 |
Детальная инфор…
-
Hello,
i have strange issue with NSPanel, firmware version 1.5.0 :
- When triggering HVAC mode change on HASS from Auto to Heat, change doesnt reflect on NSPanel itself. However, It does reflect …
-
[Tasmota](https://github.com/arendst/Tasmota) is an alternative firmware for ESP8266 based devices like [iTead](https://www.itead.cc/) Sonoff, which - besides other things - is able to do control and …
amotl updated
4 years ago
-
the reading of real-time consumption data has stopped working for a while, with the latest update I thought it had been resolved and instead it only works if I keep the application open on the phone. …
-
### Problem description
Hello good afternoon! I recently bought this solar siren from aliexpress, very well built product, however I couldn't get it to work within the ZHA, I checked and found a su…
-
### The problem
I upgraded ESPHome from 2024.2 to 2024.6 for a Pico W with the Sonoff SI7021 sensor. Measurement always fails after the upgrade; after a rollback to 2024.2, it works fine again.
It…
-
### What happened?
Via Device / Settings tab ticking the Disabled checkbox results in it immediately un-ticking itself before it is possible to submit.
I have found a workaround in that (on desktop …
-
Объясните как заставить работать сценарии по аналоговому входу.
В коде есть highalarmA0 и lowalarmA0, как понимаю это пороги сработки. В файле config.sensor.json прописаны пороги только для POW (higha…