-
_From @SurferTim on December 5, 2013 10:57_
The wifi shield client code is not releasing the socket when the connection fails. This results in the client using all the sockets in 4 failed attempts, a…
-
Hi,
I'm investigating uses for Xpressnet outside of commercial hardware from Lenz. Are you still working on implementing Xpressnet - RS485 on Arduino with the issue related to 8-bit vs. 9-bit data…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
Learned today that [SCL/SDA and A4/A5 are shared on the Arduino Uno](https://images.prismic.io/circuito/8e3a980f0f964cc539b4cbbba2654bb660db6f52_arduino-uno-pinout-diagram.png?auto=compress,format). …
-
when trying to Verify and Compile the sketch I get a Message " AF Motor.h No such file or directory"
Also what pins to use if your not using a Motor Shield !! but a Arduino Compatible Stepper Motor C…
-
Hello,
I'm using an Arduino Mega 2560 with the Keyestudio W5100 Ethernet Shield for a ModBus comunication with a HMI Weintek. On Arduino i need to read the registers from 0 to 2235. Them are all Hold…
-
I am working on an Arduino MKR Zero based project that combines an MKR CAN Shield as well as a touch screen (2.4” 240x320 using the Adafruit ILI9341 library).
When connected alone, the CAN Shield …
RBVGH updated
4 years ago