-
I can't connect to the ESC from BLHeliSuite version 2.x using the CleanFlight passthrough, it appears this message:
![image](https://cloud.githubusercontent.com/assets/2673520/24493801/55e0df8e-153…
-
Throttle was showing 885 in configurator, so the quad would never arm.
-
In Betaflight It can Auto detected and read fine. But in Inav its not auto detected.
Also, when I set manually `set baro_hardware = MS5611` the CPU load rise to about 660%
![screenshot from 2017-04-…
-
As declared in the documentation: https://github.com/cleanflight/cleanflight/blob/master/docs/Board%20-%20Naze32.md
The NAZE32 can have two SoftSerial when enabled. But if I enable them in the actu…
-
Is there no longer Support for the internal Mag on the SP Racing F3?
![1212](https://cloud.githubusercontent.com/assets/7792233/18058541/24ced71a-6e15-11e6-9d12-320ee61c660b.JPG)
As well i can't cal…
-
I would like to be able to increase the Baud Rate for my GRBL controller from 115200 to 250000 [which seems to be supported](https://github.com/grbl/grbl/issues/598).
I hope to be able to reach highe…
-
Issue Summary: Navigating to the SCR layout then backing up to main menu, then scrolling to the next page causes OSD to jump back to scr layout and is un-exitable. Craft power cycle required.
Details…
-
Hi! I don't know if you can help me with this, because it's a customized version of firmware, but I think that the code must work.
I know that GPS is deactivated for F1 targets. I've made my own pe…
-
Today, the use of Configurator 2.0.0 and v2.0.0 program set up. Then BLHeliSuite set ESC. Can not use. 2.0.0 program is not set BLHeli Bootloader (cleanfight). How to solve this problem. Trouble Thank…
-
Hi,
Currently, it's possible to assign multiple AUX channels to a single MODE.
If I understood well, it means if one channel's value match **OR** the other one's does, the mode is enabled.
Woul…
matoy updated
7 years ago