-
Hello.
I want main.hex and eeprom.hex file that I can upload to MCU.
I have STC15W404AS Chip in the pcb. I do not have knowledge to use compilers.
I use the STC-ISP program v6.86U
Thanks.
-
sd card writing is expensive we can use raspberry pi header to write to an external eeprom.
Even the btt miniups is not even supported in klipper this would be a better way to add this feature.
-
Hi,
I had some trouble using the library with the Microchip 25LC640-I/SN since this EEPROM only works reliably with clock rates of up to 2 MHz. Since the default clock is set to 8 MHz, the init met…
-
E (1086) i2c: CONFLICT! driver_ng is not allowed to be used with this old driver
void rtsp(void *arg)
{
esp_log_level_set("*", ESP_LOG_INFO);
esp_log_level_set("AUDIO_ELEMENT", ESP_LOG_E…
-
Any idea how to fix it?
Here's error messages:
Arduino: 1.8.19 (Mac OS X), Board: "Arduino Mega or Mega 2560, ATmega1280"
/Users/tritone/Documents/Arduino/muxlicer/functions.ino: In function 'v…
-
Discussed [here](https://github.com/nrwiersma/ConfigManager/pull/86#issuecomment-668023564)
When putting the wrong type in a config parameter and saving, the memory allocation gets screwy and gets …
-
-
Hi,
I converted the mlx90640-library from the original C code to C#. Testing at RPi. with I2C running at 400kbit/s
I notice that after the MLX90640_DumpEE() function, the first part of the eeprom bu…
-
Hi.
Super Mario 64 B3313 is a rom hack that I play often. For some reason, ares doesn't run it that well, even in Homebrew Development mode. There are many issues that make this game hardly playab…
-
We need automated scripts to calibrate and write to the EEPROM. For example, a script that fills the EEPROM with 0s. Or a script that can calibrate it if we ever choose to reset the EEPROM.