-
Hi all!
I started working with OpenSCAD but some things have seemed challenging for me to do programmatically and wanted to build some features if it would be considered for master branch. If I bui…
samyk updated
10 months ago
-
I got this AV receiver without remote control.
Remote should look like this:
![image](https://cloud.githubusercontent.com/assets/11026930/16897738/76920b12-4bba-11e6-8839-4368cc5ae221.png)
I tried AV…
-
### Version/revision of the library used
2.8.6
### Describe the bug
When running the verify command on Arduino IDE, it refuses to compile. It seems to be related to recent modifications in the ar…
-
```
What steps will reproduce the problem?
1. In gdk app, open camera and call Camera.takePicture() some times (usually 2
or 3 times) in a row.
2. Observe app freezes and glass reboots
Not: it *alwa…
-
During a long print (more than an hour), klipper loses communication with Eddy (Klipper reports shutdown lost communication with MCU Eddy).
I'm using Eddy on the Hurakan.
After the error, it is poss…
-
This references work done for #86 . I've been able to make this work in practice using an ESP8266 with an SHT30 temp sensor, pinging the heatpump approx every minute to update the temperature.
In d…
-
The DVB-T/DVB-C tuner is showing up as an adapter in /dev, but the DVB-S not. In the dmesg log (see below), it says, that it tries to load the m88ds3103 instead of the m88rs6000t mentioned in linuxtv.…
jlaba updated
11 months ago
-
### Describe the bug
The bosch,bmp380 family of iio sensors is supported in the 6.1.21+ kernel, but it is not supported by the i2c-sensor device tree overlay.
```
# dpkg -S /boot/overlays/i2c-se…
-
First of all I'd like to thank you to put freely available the design of the board and the code to run it.
Looking at the Arduino code I saw that your counter is based on time threshold (200 ms and…
-
_From [irasc...@gmail.com](https://code.google.com/u/104729248032245122687/) on May 19, 2011 04:38:17_
A part label is the default prefix for the part's default instance name. This appears next to th…