-
### The problem
I've been debugging this issue for 2 weeks without a solution. I belive there must be a problem with basic station. The problem occurs when sending confirmed downlinks.
1. I sen…
-
# What happened?
Using Multitech Conduit (MTCDT) gateway:
At some point during normal operation, the mqtt-forwarder will stop processing downlink correctly to end-devices (i.e: end-devices will no…
-
When we run the command that is available for Google Colab Users it generates a link ( same as before ) but when I open the link , on the new tab it keeps on running forever and nothing is displayed a…
-
## Foundation Mission Request – Proof of attendance testnet faucet
_To take on this project, submit a proposal to this thread by December 8. Read more about Missions [here](https://gov.optimism.io/t…
-
### Question
I have 1000 nodes which are in a line(Street light) 50-100 meter apart. So, I want to make sure that in zigbee mesh I can connect to last one node. Data Speed is not issue, if node get d…
-
got this installed on my lilygo t beam (the 1.2 varient with the 2101 power chip)
however I can't seem to get a gps fix
```
{
"name": "as.up.data.forward",
"time": "2024-03-18T13:01:26.…
-
I have been to communicate LR1110 IC with a gateway with LoRaWAN protocol. After setting the parameters as per LR1110 User Manual, i used set_tx function to transmit. The packet is received at the gat…
-
Hi and thanks for this nice tool.
Would it be possible to implement ans status screen (or similar) to see connection details for the LoRa connection?
I am currently testing it with the ASR6501 …
-
In setting up my gateway (WM1302) I can't seem to get connected to the TTN servers with the following errors:
```
2024-05-24 14:50:37.318 [S2E:INFO] Beaconing every 2m8s on 923.3MHz(8) @ DR8 (fram…
-
Hi everyone,
I'm using stm32duino for STM32L0 for Dragino LSN50.
I use the variant B-L072Z-LRWAN1 as it is very similar to LSN50. The only difference are some SPI and LoRa pins.
I'm able to go do…