-
_From @SurferTim on December 5, 2013 10:57_
The wifi shield client code is not releasing the socket when the connection fails. This results in the client using all the sockets in 4 failed attempts, a…
-
```
What steps will reproduce the problem?
Ethernet shield + DHCP. If the DHCP server gives you lease with "infinite"
lease time (0xFFFFFFFF) the method calculating rebind time (_dhcpT2 = _dhcpT1
-
I have swapped out my working WIFI board for the Arduino Ethernet 2 board. I used EX-Installer and set the config file with my WIFI-SSID and WIFI-PASSWORD per the instructions. I have a good network c…
-
I am working on an Arduino MKR Zero based project that combines an MKR CAN Shield as well as a touch screen (2.4” 240x320 using the Adafruit ILI9341 library).
When connected alone, the CAN Shield …
RBVGH updated
4 years ago
-
So one problem with the Xbee/WiFly board I'm using is that it only supports a single TCP port. I suspect this makes it pretty much useless for things like serial to TCP adapter mode because you can'…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
Hello,
I'm using an Arduino Mega 2560 with the Keyestudio W5100 Ethernet Shield for a ModBus comunication with a HMI Weintek. On Arduino i need to read the registers from 0 to 2235. Them are all Hold…
-
Learned today that [SCL/SDA and A4/A5 are shared on the Arduino Uno](https://images.prismic.io/circuito/8e3a980f0f964cc539b4cbbba2654bb660db6f52_arduino-uno-pinout-diagram.png?auto=compress,format). …