-
I bought anBIGTREETECH SKR V1.3 to replace my old board, which died of extruder failure (stopped driving the stepper), and I'm trying to make sure it is properly configured before connecting to my ha…
-
The text in TFT mode is not displaying correctly, I've flashed the new firmware bin that was preconfigured as well as one I compiled
[Images](https://imgur.com/a/SOZ7hBB)
-
I setup printer
got serial USB working
But for reflashing I need to remove microsd every time.
How to make USB Storage? Like SKR1.3
-
### Version
2.3.1+win64
### Operating system type + version
Windows 10 Home Version 10.0.19041 Build 19041
### 3D printer brand / version + firmware version (if known)
Creality CR-10S with Bi…
-
Hi,
The manual states that in platfrom.io the default_env is set as LCP1768 but that the processor of the SKR 1.3 not the PRO. It now shows the BIGTREE_SKR_PRO as an environment so do I use this?
…
-
About me, a buddy gave me a CTC 13A (Ender 3 clone) for free. That's how I got to the 3D print stuff and I'm an absolute beginner but I know a bit about electronic circuits.
I bought the board on E…
-
try to compile, but keeps failing with error
Marlin\src\lcd\dogm\ultralcd_DOGM.h:116:21: error: 'DOGLCD_CS' was not declared in this scope
#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 …
-
The Creality K1 seems to have no spare port for the motion detection.
Is there a way to use the sensor with this printer?
Or in general:
Is there a way to use the sensor if only a "normal" filament…
-
Built Marlin 2.0.7.2 from this distro for this board, and have not been able to write to EEPROM successfully, receiving the following output firing M500:
Send: M500
Recv: echo:Error writing to…
-
hi how are you?
actually i am trying to connect tft 35 or mini 12864 v1 to the boart btt e3 rrf- through reprap and no luck((( https://teamgloomy.github.io/Configurator/Start using this one!)
cou…