-
Where would the header file "Adafruit_BLE_UART.H" be found?
I've installed the Adafruit nRF52 BSP v0.9.3 from https://www.adafruit.com/package_adafruit_index.json.
I then selected board "Adafrui…
-
As this now boots back into DFU, a flash erase loop is no longer an issue, and the keypress requirement is no longer necessary, IMO.
-
Hello, luar123.
I have prepared a small example with my Zigbee classes. You might be interested.
https://github.com/Muk911/esphome/blob/main/esp32c6/hello-zigbee/hello-zigbee.yaml
Best regard…
-
`hf2` is unable to flash an [nRF52840-mdk-dongle] on macOS. Even though the device is plugged in and in bootloader mode, `hf2` (and `cargo-hf2`) both fail to interact with it:
```
thread 'main' pa…
-
**Describe the bug**
RTT logs are not shown after a reset.
**To Reproduce**
Steps to reproduce the behavior:
1. clone https://github.com/tweedegolf/nrf9160-rust-starter/tree/rtt-after-reset
…
-
-
See https://github.com/microbit-foundation/DAPLink-microbit/issues/119
It would appear that DAPLink versions that are identical apart from their version number yield different behaviour when datalo…
-
The following error occurred when I used programmer to upgrade the USB DFU device, but everything worked fine when I used nrfutil
HW:nRF52840 DK
softdevice:7.2.0
sdk:17.1.0
programmer:3.0.8
the…
-
Thank you for this nice little SWD programmer GUI and the glitcher for the ESP32 :D
I am currently trying to glitch an nrf52832. I narrowed down the glitching width in the source code to 6-10us, as…
-
So my HTPC remote control was not functioning as intended for a few days, and I used my mech keyboard via a cable for the time. And I thought, isn't it great to use a mech on my HTPC (thats also made …