-
### Problem description
Illuminance Tuya Sensor zigbee report too much entity (temperature, umidity) and illuminance seems not work correctly
### Solution description
Illuminance Tuya Sensor zigbee…
-
**Is your feature request related to a problem? Please describe.**
I bought 5 ZigBee Thermostatic Radiator Valves but they are not recognized properly in ZHA.
Running ZHA with conbee II stick
**D…
-
I have a 4ch module
I screwed around in config and chose wrong module
The 4chan is talking on my mqtt bus
and i can reach it from http
But how to issue change to 4channel mode via http?
like, I…
-
Hi,
i've a zbdongle-e with last router firmware that don't permit to new device to join in zigbee network via zigbee2mqtt homeassistant addon.
firmware installed link: https://github.com/itead/So…
-
I have a PS 16 DZ dimmer flashed with Tasmato. Everything works fine with the Tasmato software. I can dim and toggle no problems! https://github.com/arendst/Sonoff-Tasmota/wiki/PS-16-DZ-Dimmer. Then I…
-
### The problem
I have an automation that if a climate (with a door sensor) is on (maybe turned on with remote for example) else turn on the broadlink switch to on. Same automation do same things als…
-
the hardware is sonoff 4CHPRO3
-
I'm having lots of Cloud errors, the 504 on
I'm wondering if the time out period is to short before the error is issued.
I've done tracert to ewelink.cc (which is a Cloudfront 162.159.137.9 IP). I'm…
-
@
re PR: arendst/tasmota#
In page docs/Sonoff-DIY.md, the last curl uses `$HASH` without defining it beforehand. I understand that it is meant to contain the sha256sum of the firmware file, but th…
-
### The problem
Climate controllers start in the off state, one must use `on_boot` to set the desired default state, [cumbersome](https://github.com/esphome/issues/issues/2233).
`default_mode` w…