-
Tool Diameter (mm or in): 8
Stock Size X (mm or in): 312.5
Stock Size Y (mm or in): 185
Feedrate (mm/min or in/min): 2000
Spindle Speed (RPM): 1000
Depth of Cut / Depth per Pass (mm or in): 0.2…
ghost updated
8 months ago
-
### Description of the bug
When the slicer automatically places the purge tower, it is too close to the edge and gets that error.
It's either an error in the detection because it's right on the li…
-
*@xutpuu commented on Feb 28, 2019, 12:57 PM UTC:*
I add Python task and wrote inline script to run on self-hosted pool. In the build it failed with error "Parameter 'toolPath' cannot be null or empt…
ghost updated
9 months ago
-
When slicing sloped shells, e.g. at 45 degrees, CuraEngine generates an aggressive toolpath of little zig-zags with many travel moves on the inner shell wall. It causes shaking and vibrations even on …
-
### OrcaSlicer Version
1.9.0-beta
### OS version
Windows 11
### Additional system information
Processor AMD Ryzen 9 5900HS with Radeon Graphics 3.30 GHz
Installed RAM 16.0 GB (15.4 GB …
-
Thanks for making this action!
I'm having an issue running it on Windows:
```
Run svenstaro/upx-action@v2
with:
files: target/x86_64-pc-windows-gnu/release/taskwarrior-tui.exe
…
-
In my current setup, I use tox (version 3.24.5) to run mypy for type checking my codebase. I specified a few files to be excluded from the checks in the ``setup.cfg`` file. Previously (mypy version 0.…
-
in standard openscad
* a cube has a corner at 0,0,0 ; with center=true, it is centered about all axes
* a cylinder is centered on x and y, and also on z if center=true
* a sphere is centered at the…
-
### What happened?
After slicing there can be seen a toolpath outside print area was detected in gcode preview.
` throws a `RuntimeError` stating "Can't dereference NULL pointer!" when used like so (with valid parameters for `open` and `set_path`):
```python
from camotics import Simulati…