-
```
D800 and all cameras that I try to connect not recognized.
I use Tplink MR3040 with OpenWRT.
Log from MR3040 when i try to connect from dslrdashboard:
Apr 4 15:18:47 OpenWrt user.info syslog: I…
-
```
D800 and all cameras that I try to connect not recognized.
I use Tplink MR3040 with OpenWRT.
Log from MR3040 when i try to connect from dslrdashboard:
Apr 4 15:18:47 OpenWrt user.info syslog: I…
-
```
D800 and all cameras that I try to connect not recognized.
I use Tplink MR3040 with OpenWRT.
Log from MR3040 when i try to connect from dslrdashboard:
Apr 4 15:18:47 OpenWrt user.info syslog: I…
-
```
D800 and all cameras that I try to connect not recognized.
I use Tplink MR3040 with OpenWRT.
Log from MR3040 when i try to connect from dslrdashboard:
Apr 4 15:18:47 OpenWrt user.info syslog: I…
-
There is a way to add two or more cameras?
ghost updated
7 years ago
-
### Describe what you want to implement and what the issue & the steps to reproduce it are:
**System Goal:** Our goal is to have 2-4 cameras connected to capture images displayed on a screen simult…
-
I’ve tested multiple kinect support. Unfortunately, It didn’t work. I checked start event. Probably, DeviceEvent.STARTED event occurred at one device. but DeviceEvent.STOPPED event occurred both. I te…
-
We are running two Kinects through the ROS driver, and it seems like there is an issue connecting them through the USB. The weird part is that sometimes the cameras connect without an issue, or restar…
-
Dear Motion ! i have installed motionEy OS and is working great with some usb cameras on my raspberry pi 2
On my Try to add RTSP link that works fine on VLC i get HEader Error
the link i have on …
-
My project has 3 file, i do " ros2 run micro_ros_setup configure_firmware.sh myproject --transport serial " - Successfully
" ros2 run micro_ros_setup flash_firmware.sh " - Successfully , "ros2 run…