-
When allowing new device, the aqara cube is recognized by zigate. All movements (shaking, 90 degrees, 180 degrees, and so on) are working well and appeared in the log.
But when adding a http reque…
ghost updated
6 years ago
-
I'm struggling to get this to work. I've worked through the read.me instructions and installed everything correctly (I think). I get some error messages when I run the sudo node rpos.js command.
I'm …
-
Hi,
In log I see something worrying:
"
2019-01-25 18:37:11.289 Error: (Deconz zigbee) 'onHeartbeat' failed 'KeyError'.
2019-01-25 18:37:11.289 Error: (Deconz zigbee) ----> Line 722 in /home/pi/d…
-
**Describe the bug**
I joined 2 temperature sensors (Xiaomi) and 1 motion sensor (Osram Lightify). In the devices tab, they appear in the list with the initial readings and the "Last Seen" column sh…
-
I'm unable to install 9.21.2 currently on Windows 10 Version 1803 Build 17134.345.
I've ran the Cert Check as I saw this was a similiar error, but not exactly the same:
```
PS C:\Program Files\…
-
uninstalled drivers, rebooted countless times.
with cable, with bluetooth..
nothing works, DS4 won't detect my controller.
I can connect to my PC via bluetooth, but no input is allowed.
…
-
> When we execute a HTTP request, the result will be a HTTP response containing the result data. For example every camera provides an URL that can be used to get a single snapshot image.
This is no…
-
Issue was previously closed without solution:
https://github.com/esp8266/Arduino/issues/5524
#### Platform
- Hardware: [other - WEMOS d1mini pro]
- Core Version: [l1e17ddd]
- Developme…
-
I searched the forum/wiki and the solved issues and i came to the conclusion that the xiamo smart plug should show up with energy consumption. But for me (V4.9730) this is not happening. I only can to…
Lyr3x updated
6 years ago
-
Please advise which method I can use to get HardwareID or Serial Number in linux (Ubuntu & RaspberryPi)