-
We built one of the chessboards for my son to play and we cant even get through a full game without it crashing. Sometimes the crash just happens randomly and the board does the startup green cell by …
-
The current transformer design should ensure a coupling coefficient of approximately 0.8-0.9, but current measurements show only 0.5.
Hypothesis:
Stray inductance in the primary winding is likel…
-
Following the [other issue](https://github.com/adafruit/M.2/issues/10) here a thread to talk about potential use cases for module makers.
This would be everyone who is interested in making modules …
-
On my Taranis, I'm only receiving audio alerts from the MAVLink data, such as prearm warnings, and flight mode changes. Voltage, current, heading, GPS and other telemetry do not display on the screen…
k5njm updated
9 years ago
-
My monster8 v2 starts burning on the marked piece after holding the boot button while the board is off and turning it on with the button pressed. I'm trying to add marlin binary file transfer via octo…
-
**"Always Look Twice"**
GFX_evt_mem_ancient_mining_site
Note: Starts on a habitable planet/moon
Our survey on [planet] has indicated the present of several simple structures spread roughly eq…
-
Hi,
A week ago I setup NUT Server on a Raspberry Pi 3 connected with USB to **Powerwalker VFI 1500 RMG PF1** UPS.
`nut-scanner` detected it like
```
[powerwalker]
driver = "nutdrv_qx"…
-
-
```
Steps to reproduce the problem
1. Connect MinimOSD to the APM in parallel to the Xbee or any other modem,
following the instructions of the tutorial. Remember to do not connect the APM
RX pin w…
-
```
Steps to reproduce the problem
1. Connect MinimOSD to the APM in parallel to the Xbee or any other modem,
following the instructions of the tutorial. Remember to do not connect the APM
RX pin w…