-
## Description
Users report big picture / introductory / overview documentation is lacking.
To address this issue, looking to get the following two sketches converted to the formal graphic design (…
-
Concept panel and tool
![baseshapepanel](https://github.com/shaise/FreeCAD_SheetMetal/assets/538057/70108355-6c90-4eb1-8c4b-17ff5a57131f)
![Baseshapetool](https://github.com/shaise/FreeCAD_SheetMe…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
On the Mac, there are multiple keyboard layouts for the Dvorak keyboard. The
one that I use switches back to the Qwerty layout when using the ⌘ (Command)
key (partially for people who are used …
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…