-
Hardware support for NMEA2K using a cheap ~~SN65HVD230~~ TJA1050 Chinese board.
NMEA2K cable can provide 12v to the m5stack and the ~~SN65HVD230~~ TJA1050 can translate the CAN messages to be readab…
-
Hello, i get data for topic `service/truma/display_status` but `cp_plus_status` is always `waiting`.
I tried RESET at CP Plus, but no change.
Any idea ?
-
Hello,
First of all, sorry for posting there but I've been reaching Michigan Synth Work for my issue with 0 answers from them (my 16n was built by them).
I use the 16n faderbank mostly for the C…
-
Hey All -
Had most parts sitting around and wasn't happy with current solution so gave it a shot. Only main differences was that instead of using a buck converter (couldn't find one), I used a st…
BzowK updated
2 years ago
-
See: [PCI-E to USB 3.2 Expansion Card for Raspberry Pi Compute Module 4 IO Board](https://amzn.to/2VfqbcR)
![61WqQVb6TdS _AC_SL1500_](https://user-images.githubusercontent.com/481677/128242492-532f…
-
I set up and installed software. Add the batteries and full charge. Then i left my pi to discharge and then plug it to recharge it. My pi is showing full charge led status. But, if i boot my pi and ru…
-
We are reviewing some possible parts for the first prototype
## Light sensors
- AS7265x https://learn.sparkfun.com/tutorials/spectral-triad-as7265x-hookup-guide?_ga=2.232539866.474586204.15576131…
-
Hello,
I'm trying to use 2 MCP in the same sketch, but meet no success. Both have different addresses and are working well alone (both connected to the same bus, but sketch is talking to only one a…
-
Hi
I just finished recapping my MZ80k and tried to load this awesome project onto an Arduino. I get all kinds of errors in the current Arduino IDE when I try to compile it. I then tried with downgrad…
ottj updated
2 months ago
-
[Sent packet 0x00000000 00C3108.txt](https://github.com/qwertychouskie/GM-EandC-Cemu-v2/files/15378948/Sent.packet.0x00000000.00C3108.txt)
Followed the guide provided on Reddit, using Stuart's…