-
**Describe the bug**
> Debian 11
> Linux 5.19.0
> essx8336 codec
Kernel loads firmware, and there are output/input devices listed in pavucontrol, but the is no sound (even no hissing) from speak…
-
Is is also possible to run this without the VS1053 as described [here](https://github.com/espressif/ESP8266_MP3_DECODER#running-without-the-i2s-dac)? This would shorten the long waiting time for the C…
-
Hello,
I am Jean, 0W1 audio's founder.
D5 is an award-honoree in the Wireless category, with a Sacha Lakic Design.
D5 is a new and fresh vision of the "Music Box".
This is our vision of 21st ce…
-
**Describe the bug**
Sound card is not detected.
`tony@huawei:~$ aplay -l
aplay: device_list:277: no sound card found...`
A new kernel, version 6.7, was installed; both our own kernel assemblies …
-
I'm trying to setup Linear Advance / Pressure Advance.
M900 is not found and the linear advance calibration pattern lines look all the same.
I'm trying to find out if the K-Factor settings in …
-
My goal was to work out the loudest amplitude fundamental from my samples and return its frequency. Using esp32.
Obviously before I start I got my I2S device recording and playing back - I can hea…
-
Hi,
I figure that there is different behavior depending the ESP32 board used :
- I have tested on "wemos D1 mini 32" : I have very bad sound with internal DAC (bad power supply stage on this boa…
-
hello, my question is if I can use 2 octo cards for the same raspberry, or in their defender, use a second raspberry as a slave, but that the audio programs of the raspberry master recognize the 12 in…
-
I am building the ESP32 Radio V2 project but without using internal speakers or ear phones. My radio consists of a EZSBC ESP32 board; PCM5102A I2S MP3 decoder board; VS1838B IR receiver board; Nextion…
-
Hello and thanks for a great project. This is my first time with plaformio and a project of this size. Im new to all this.
I compiled ok and loaded ok which is great but it does not seem to work f…