-
Environment:
* OctoPi image - Linux kernel 5.4.79-v7+
* OctoPrint v1.7.3 (latest)
[octoprint.log](https://github.com/thelastWallE/OctoprintKlipperPlugin/files/8653967/octoprint.log)
Hello, w…
-
I have 5 z axis motors, if I want to run only 1 z axis motor when printing. The others 4 z axis motors will be doing for bed levelling only, after that will stay idle. Can this be done?
-
I'm using a BLTouch as a virtual endstop. I've noticed that `[safe_z_home]` moves the nozzle to the specified `home_xy_position`. But shouldn't the probe moved to that position instead?
I've tried …
jue89 updated
2 years ago
-
Hi,
I wonder if the devs could comment on how this plugin differs from (or interact with) this new PR to Klipper: https://github.com/Klipper3d/klipper/pull/5374? Is there any thing we should be awa…
-
I have written a small test code in order to try out some wait macro idea. The code goes as follows:
```
[gcode_macro test_code]
gcode:
{% set _test = params.TEST|default(0)|float %}
…
-
I just discovered that it’s possible to update firmware via SD Card on Klipper after Klipper has been initially flashed to a controller. This can be very helpful if a board is mounted in a location th…
-
-
After Update to Klipper v0.10.0-76-g54e21a7c - Error: "Option 'shaper_type' is not valid in section 'input_shaper'"
I haven't made any changes in my printer.cfg.
I see no changes at klipper3d.org fo…
-
Documentation for [BL-Touch initial tests](https://www.klipper3d.org/BLTouch.html#initial-tests) are not correct.
```
Run BLTOUCH_DEBUG COMMAND=pin_down, verify that the pin moves down,
run B…
-
### What happened?
I'm running a printer with a 2-in-1-out Y adapter on the hotend. Klipper requires an extruder parameter to be specified when using SET_PRESSURE_ADVANCE with multiple extruders. Whe…