-
Running test-metal-shared and get a failed result
```
root@localhost:~/libmetal/build/test# sudo ./test-metal-shared
libhugetlbfs: WARNING: Unable to find default kernel huge page size
metal: d…
-
Hi, I'm very interrested on using DPU on the PYNQ-Z2 plateform and according to xilinx the DPU v3.3 is supported on zynq-7000 series (https://www.xilinx.com/html_docs/vitis_ai/1_3/dpu_intro.html#gub15…
-
Hi all,
I followed the example in https://github.com/Xilinx/Vitis-AI-Tutorials/tree/master/Design_Tutorials/09-mnist_pyt and successfully quantized my model and then compiled it to be CNN_zcu102.x…
-
Hello,
I have tried installing this with the following (as stated in the instructions):
sudo -H pip3.6 install --upgrade git+https://github.com/Xilinx/PYNQ-DL.git
however, this gave the followi…
-
Issue with getting real-time video stream into PYNQ via HDMI input cable connected to camera source
I'm successfully done with laptop HDMI input to monitor HDMI out with PYNQ but when i tried to co…
-
Hi, all:
Is there anyone who met the following problem:
root@pynq:/home/xilinx# git clone --recursive --shallow-submodules https://github.com/Xilinx/DPU-PYNQ
Cloning into 'DPU-PYNQ'...
rem…
-
I'm using a Arm Cortex A9 processor on the Xilinx Pynq Z2 board. People have tried to use it for the raspberry pi 3 without luck in previous posts.
I figured out how to successfully build it for ar…
-
Do image with pre-installed Caffe and Theano dependencies work on PYNQ-Z1 or PYNQ-Z2
-
Hi,
I have a kernel I'm trying to run on a U280
XRT fails to load it with the following dmesg:
```
[448317.846952] xocl 0000:a4:00.1: p2p.u.10485761 ffff8e8914708410 p2p_bar_map: bank addr ff…
-
您好!
能否提供正确的TopMain.v文件,供参考? 我使用0.6.3的mill创建了TopMain.v文件, 在fpga目录下, 使用pynq板卡, 创建vivado工程时,得到错误:
########## Vivado ERROR LOG ########
WARNING: [BD 5-232] No interface pins matched 'get_bd_intf_pins…