-
Evaluate changes for embedded-hal-async 0.2.0-alpha.1.
-
A trace is given below of stm32wl example lora_lorawan.rs, which is expected to fail here because there is no LoRaWAN gateway with which to communicate. However, the trace does show the setup for chi…
-
Hi, its looks like some stm32f103(blue pill) and stm32f(401)/(411) dont properly work under embassy, but works fine under stm cube code generation. I build blinky example from stm32f1 and stm32f4 and …
-
Hey there. I've been trying to connect to a couple wifi routers I have, and most recently to my phone hotspot (Pixel 6, because I can put it right next to the Pico, which gives more consistent results…
-
Hi,
I'm trying to get PWM working on TIM2 with an output on PA15 on the BluePill (STM32F103). I find that the Timer::after(..) no longer works after the SimplePWM instance is constructed.
He…
-
I'm currently trying to use `Sx126xRadio` that #985 has brought. As defined [here](https://github.com/embassy-rs/embassy/blob/b99533607ceed225dd12ae73aaa9a0d969a7365e/embassy-lora/src/sx126x/mod.rs#L2…
-
Useful for generating HALs.
It can be obtained from the NVIC XMLs:
https://github.com/embassy-rs/stm32cube-database/blob/main/mcu/IP/NVIC-STM32F777_Modes.xml#L4
-
I had the following code that could not compile:
```rust
let irq = embassy_nrf::interrupt::take!(UARTE2_SPIM2_SPIS2_TWIM2_TWIS2);
```
It gives the following error:
```txt
error[E0433]: fai…
-
Hi fellow ambassador Rustoceans :crab: !
I hardly tried to implement a shareable struct between embassy tasks.
I want to share a struct like this:
```
pub struct SomeObj {
counter: u8,
}…
-
Sometimes one needs his code to be fully executable in RAM. For example when writing the internal FLASH initiated from the firmware. Or like in my case I want to have ramcode which, in combination wit…