-
```
It's more like a question than a bug report, but my provider's statistics
differ from netsentry's. It happens in steps, and now, they are approx. 15MB
apart (42 vs. 57). Is my provider defraud…
-
Does somebody know why the total energy used sensor does not update and stays 0.00 kWh?
Do I need to change the update interval or something?
-
### Description
In my code I follow the instructions from the docs and create a session using this snippet:
```csharp
var providers = new List()
{
new EventPipeProvider(
…
AT-WH updated
5 months ago
-
dBm/Hz is calculated as dBm/Hz = dBm/nHz - 10log10(nHz), so for a threshold of -90 dBm in a 1 MHz RBW translates to:
-90 dBm/1MHz - 10log10(1MHz) = -90 - 60 dBm/Hz = -150 dBm/Hz
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I was using CONTROLLERFAN_SPEED_ACTIVE at 190 and worked fine until I activate LASER FE…
-
I try to control a servo using the PWM timings in the range of 1000 us to 2000 us (https://en.wikipedia.org/wiki/Servo_control#/media/File:Servomotor_Timing_Diagram.svg).
I set the maximum steps to…
-
BPO | [20479](https://bugs.python.org/issue20479)
--- | :---
Nosy | @rhettinger, @gpshead, @ncoghlan, @stevendaprano, @wm75, @remilapeyre
Dependencies | bpo-20478: Avoid inadvertently special casing C…
-
Check all SCAN fields:
- eve.db
- FPGAClk-Cte: **1 second**
- cmd_ctrl_get: register 0 (Link, Interlock Enabled, Interlock Active, Device Enable): **1 second**
- cmd_tmstmp_get: register …
-
./src/access_x86_msr.c:83:5: error: impossible constraint in "asm"
__asm__ voliate("rdpmc": "=a" (low), "=d" (high): "c" (counter))
i try to make likwid on armv8 machine with gcc, the above error …
-
Currently, we do this:
* VIA#1 (NMI):
* All GPIOs are in use by internal hardware.
* Timer 1 is used by the entropy driver (free running $ffff->$0000).
* Timer 2 is used by the Serial …