-
Das Script läuft prima im Docker Container auf meiner NAS. Ich habe einen Shelly 1 Pro als Zwischenzähler drin. In der Config ist der Shelly auf true und die IP ist auch drin. Allerdings holt er sich …
-
### PROBLEM DESCRIPTION
**Setup:**
An ESP32 Dev board connected to 8 relays ([HF32-FA-G-005/HSL](https://www.tme.com/in/en/details/hf32fa-g_005-hsl1/miniature-electromagnetic-relays/hongfa-relay/)) …
-
### Feedback
I have two houses and in each have home assistant running. Between the two I must have about 20 Sonoff S31 smart plugs on which I have installed tasmota. I am using the Tasmota integra…
-
Hallo,
I have a simple setup. Wemos d1 2 button and 2 relais. Tasmota 6.5
I have created the following rule:
rule
on Power1#State=1 do websend [10.xx.xx.xx:8181]/cuxd.exe%3Fret=dom.GetObject%…
-
### Describe the issue
Similar issue different words. Referring to #381
### What version of Home Assistant Core has the issue?
core-2024.3.3
### What was the last working version of Home A…
-
### PROBLEM DESCRIPTION
Running Tasmota on a Sonoff SPM with 20 relays (with 5 `4-Relays` slaves).
I try to change the Friendly Name for all the relays in order to give them some meaningful name…
-
### PROBLEM DESCRIPTION
After flashing development release of tasmota for ESP32 I'm stuck in endless reset. Switch to FBL and reflashing is possible via pressing Button. Output from UART:
rst:…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
Hi!
I have Shelly 1PM flashed with current tasmota and I am trying to use it as middleman between thermostat…
nefh updated
8 months ago
-
Also the device is working very fine on Sonoff basic, I canot tasmotize the zbbridge with the device. The invalid header error is raised everytime.
Also, the "self reseting" feature of tasmotizer wi…
-
### What happened?
I've installed three Docker containers on iHost, including HA, eclipse-mosquitto and zigbee2mqtt. All of them are up and running.
I've made numerous attempts, installations a…