-
### Board
esp32
### Device Description
n/a
### Hardware Configuration
n/a
### Version
latest master
### IDE Name
esp-idf v4.4
### Operating System
linux
### Flash frequency
40
### PSRAM …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi,
I just tested the motion detection example, works fine as is. The program runs for hours (made 200 000 loops so far)
I then added wifi to send the detected capture to a server.
When I connect…
-
Is it safe for `&mut BLEAdvertising` to be marked with `Send` similar to https://github.com/taks/esp32-nimble/commit/046882663252b08626744cb1ee3d9fffa5ef1fa2? I want to access the advertising from the…
-
### The problem
Nach dem Update auf Current version: 2022.12.0, bekomme ich im Log der ESP32-Cam folgenden Fehler (Log):
INFO Starting log output from esp_cam_yt.local using esphome API
INFO Succ…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I tried to upgrade from the ESP32 Cam to the ESP32S3 Cam to eliminate the lag issues I was having, but now in the serial monitor I get the below message message. I have tried different USB cables but…
-
i built a firmware for ESP32 GENERIC S3 (ESP32-S3-WROOM-1)
python3 make.py esp32 submodules clean mpy_cross BOARD=ESP32_GENERIC_S3 DISPLAY=ili9488 INDEV=xpt2046
by using this command.
binary file c…
-
### **For anyone ending up here during debugging:**
### Use the oneshoot api also provided, the legacy api does not work correctly for the newer cores
The analog abstraction does not seem to wor…
-
Hi mantriyogesh
Hi kapilkedawat
@mantriyogesh , @kapilkedawat
The router is set to WPA2WPA3 mixed mode, connect ap fail. Reason 202
The firmware log has been sent out authentication
But sniffer c…