-
ESP32S3, 使用GC2145,输出RGB565格式的图像, 当分辨率小于等于FRAMESIZE_XGA时, 能够正常输出, 当分辨率大于FRAMESIZE_XGA时, 输出错误信息: cam_hal: EV-EOF-OVF.
//EXPERIMENTAL: Set to 16MHz on ESP32-S2 or ESP32-S3 to enable EDMA mode…
-
From version 2.0.4 throughout version 2.0.8 (latest stable) esp32-camera calls uninstall_gpio_isr_service from within esp_camera_deinit which can "break" other components that relied on the isr_servic…
-
High KonradIT!
I am happy to learn that your amazing site is as up as it was 2 Years ago.
You won't remeber me but I was trying to set up a gopro as dashcam.
We went pretty far by now the last 2 …
-
### Board
ESP32 DEV modules with cameras
### Device Description
AI-THINKER ESP32-CAM
- but will also affect any board using the esp-cam code/examples
### Hardware Configuration
ftdi serial for p…
-
Hi guys, do you about this? how to solve?
`00:35:05.141 -> [00:00:03.631 WARN setup] Startup Failure: Need PSRAM to be enabled `
-
Startup Failure: Camera init error 0xffffffff on CAMERA_MODEL_AI_THINKER
i try whit the default example and it work correctly but with this code i just throw me a error
-
### The problem
After update to latest DEV version no more device configs show in web ui.
![image](https://github.com/esphome/issues/assets/16975883/fbef14d5-4f9f-4227-a0e8-62804eac8188)
all c…
-
git refuses to take my push - so here's the needed file and change:-
cat creations/freenove.md
```
# Freenove
Community Allocated Creation IDs for [Freenove](http://www.freenove.com/)
Cr…
-
### Issue
I can flash a program onto my ESP32 once or twice with espflash, but after that, even if the chip is in download mode, it fails with the following message.
```
Error: espflash::connec…
-
Is there a way for you guys to add the noise reduction and sharpness control for ov2640 for Arduino?
I found that ov3660 supports those modes, and there is info on the web for the ov2640 sensor as we…