-
https://howtomechatronics.com/tutorials/arduino/arduino-and-mpu6050-accelerometer-and-gyroscope-tutorial/
- und dann die 3D - Modelle von unserem Roboter verwenden?
-
```
--- Terminal on COM8 | 115200 8-N-1
--- Available filters and text transformations: colorize, debug, default, direct, esp32_exception_decoder, hexlify, log2file, nocontrol, printable, send_on_en…
-
Getting this issue in LSOS when trying to compile:
In file included from Buttons.cpp:8:
C:\Users\Dan and Heather\Documents\Arduino\libraries\DFPlayer/DFPlayer.h: In member function 'void DFPlayer:…
-
Hello,
whatever I am doing I always get the report that there is a magnetic anomaly detected.
I am using a Teensy 3.6 and added the "i2_t3" library and optimized the USFS library to work with it.
…
-
```
What steps will reproduce the problem?
1.Install release V2.9 r300
2.Set Throttle Rate PID to P=0.35, I=0,D=0.02,IMAX=8.0
Set Altitude Hold PID to P=0.4, I=0.01, IMAX=3.0
3.Fly the quadcopter to a…
-
Please set CONFIG_AK8975=m
Tested with:
* https://gist.github.com/jadonk/99288dd94fb16b6c764c7c81c7735dd0
* https://gist.github.com/jadonk/bcc5f1e65f39406800c3c32cb81290b1
```
debian@beaglebo…
-
When trying build for the pi, the build fails with this output:
`make ARCH=arm CROSS_COMPILE= -C /lib/modules/3.13.0-24-generic/build M=/home`
`/path/to/rtl8812au modules`
`make[1]: Entering direc…
-
Hey Kris, i wanted to get readings from two MPUs but since there is only one mag address the solutions i could find was using a multiplexer. Is there any other way? Should i consider using SPI interfa…
-
Hello,
I am trying to get my hyperpixel 4 display to work with aosp 14 on my rpi 4 but it doesn't seem to. I am using this config:
```
# Kernel
arm_64bit=1
kernel=Image
# Ramdisk
# gpio=2…
-
In this issue, I propose to discuss the best way to implement gyro functionality