-
We are using OKD4.5-GA release with vsphere cloud provider.
In our installer.yaml we have set ingressVIP and apiVIP.
Using this installation parameters, the installer will generate a 00-worker a…
-
I wanted to make it so that on my test pc there would be a message saying that I need to Log in to the network "Open the login page"
See the first screenshot.
And after clicking on "Enter the ne…
-
In include/network-config-manager.h
I see following APIs to configure the network:
```
int ncm_link_add_default_gateway(int argc, char *argv[]);
int ncm_link_set_dhcp4_section(int argc, char *…
-
Hi,
I have two nodes leader and child. There is no output from ping command in leader device. The ping command is successful. But I could see from network analyzer of Silabs IDE, the ping response is…
-
Hello.
The firmware is assembled without errors.
Stitched without errors.
The download field does not work, the power buttons do not work and I do not see the device on the network :(
**xiao…
-
Hello,
I installed the OpenThread ot-rcp example on my Borderrouter (Raspberry Pi 3B with nordic nRF52840 Dongle) and an ot-cli-ftd example for my Thunderboard Sense 2 (EFR32MG12).
**For the Bor…
-
Good Morning.
I tried replacing the libmbed.a with the file built from this repo, the device crashed at start up. I can't find what is wrong, can you give me a hand, thanks a lot !
I build libm…
-
**Describe the bug**
DHCPv6 works (slightly) differently from v4 and is also configured (slightly) differently from it.
Namely, the configuration defined [here](https://github.com/NixOS/nixpkgs/blob…
-
Hardware:
- [Pi4 ] Raspberry Pi [1/2/3/4]
**Home Assistant OS release:**
Hassos 6.4
** HA Info **
## System Health
version | core-2021.9.7
-- | --
installation_type | Home Assistant OS
…
-
Bonjour,
Je ne souhaite pas utiliser d'IPv6 , comment désactiver l'IPv6 complètement ?
@Ysurac Merci par avance pour l'aide
Merci
Kilian