-
### Kyoo's version
4.7.0
### What happened?
Bonjour :)
In a system with an integrated GPU, Kyoo doesn't seem to have access to the dedicated GPU for hardware accelerated transcoding. Infinite lo…
-
this is a valuable project, thanks for this work!When I was training the model, I was reminded that 63g memory is still needed. May I ask what hardware configuration is needed to reproduce this projec…
-
Hi, I can see from the docs that I need a "PCSC compatible NFC reader" but is there anything more specific I should be looking for? I'm having trouble getting an HID Omnikey 5022CL to work. Is that co…
-
### Environment
* nautobot version: 1.5.x
* nautobot-ssot-ipfabric version: 2.0.0
* ipfabric version: 6.x
### Summary
IP Fabric records two serial numbers:
- "Unique Serial Number"
- …
ghost updated
7 months ago
-
- [ ] add cap to voltage regulator
- [ ] change schematic position of switch
-
Hello together,
i found finally time to continue the work on my amplifier. I'm more the HW guy an struggle currently to compile the package in VS Code... Anyway i need then help to adapt this SW to…
-
Hi there,
I am looking into building this project to replace my rPi and openWRT based clients which annoy me with either too long boot time or too high power consumption. As covered in #28, none of t…
-
(1) Consider switching to WS2813.
(2) Remove AVR+accel. Maybe put accel on top edge with double center wires.
(3) If keeping mic, add rest of circuit.
(4) Make USB so left-handed cables can be use…
-
Hello,
I am interested in your project.
I would like to do the same but replacing the valve with a water pump.
I have a question about the valve....
You indicate "The valve and valve driver (which…
-
- [ ] 8051
- [ ] C8051F330: Silicon Labs ToolStick
- [x] AVR
- [x] ATtiny85: Adafruit Trinket
- [x] ATtiny13A: Cheepit Sparrow
- [x] ATmega328P: on breadboard
- [x] Cortex-M
- [x] S…