-
Hi there,
This library is epic. Does it work for a full-duplex web socket implementation? I want my ESP32 to act as a client and connect to a websocket WS server (that returns audio to the client). I…
-
Hi
I use a A2DP sink device programmed with an earlier version of the Pico SDK and an earlier version of the board implementation.
Now, I had to change some things in the program. I am using ardu…
-
Hi Ed,
I didn't know if you knowing there is a special ESP32 for audio functions. It has a AC101 audio decoder inside. There are also very complete development boards like the AI Thinker audio deve…
-
### The problem
Helly
I try to get running a Raspiaudio muse proto for voice assistant. I installed the voice assistant module with the esp-idf framework. Its so far its running... sometimes. The vo…
-
Hello there,
My `/usr/share/alsa/cards/vc4-hdmi.conf` is as follows:
```
# Configuration for the VC4-HDMI sound card using software IEC958
# subframe conversion
vc4-hdmi.pcm.hdmi.0 {
@arg…
-
Some of my packets don't get decoded because of the above error. Or they do get decoded, but are missing parts. The larger the packet, the higher the chance of an error. I'm using Alsa with a SoundBla…
ghost updated
2 years ago
-
Hi there,
What is the process for getting BeagleBone Capes supported on the BBB version of Volumio? Is it the same sort of thing as for the Raspberry Pi where you just pull in the standard Kernel a…
-
-
Hello, Eli H. Thank you very much for sharing your design about the IMXRT685 DSP chip!
I'm interested in this chip recently, I found your design and want to take it as one of my references.
About th…
-
### Describe the bug
I am needing help with a RPi4 on getting the DSI interface activated so I can use a (OSOYOO 5 Inch DSI Touch Sceen)
I am using a (Raspberry Pi Compute Module 4, 1GB, 16GB - CM…