-
i am trying to program / load an executable into ibex_demo_system following the commands in github on Arty-A7.
The FPGA is programmed ok but on last command ( ./util/load_demo_system.sh run ./sw/hell…
-
### Development Kit
Custom board
### Module or chip used
ESP
### Debug Adapter
On board USB/Built-In
### OpenOCD version
esp32-win32-0.11.0-esp32-20220411 and earlier
### Operating System
Win…
-
### Development Kit
every
### Module or chip used
esp32
### Debug Adapter
ESP-PROG
### OpenOCD version
0.10.
### Operating System
Windows, Linux MacOS
### Using an IDE ?
Plattformio
### Op…
-
Hi,
I am trying to start work with the esp32-c3-devkitm-1 with the eclipse pluge in ,
first i test if i can burn the FW like gatt_server to board with the original build in usb and i seccueded ,
th…
-
### Environment
- Development Kit: ESP32-C3-DevkitM-1
- Module or chip used: ESP32-C3
- Debug Adapter: ESP-PROG
- OpenOCD version: v0.10.0-esp32-20210902
- Operating System: Linux
- Using an ID…
-
### Development Kit
ESP32
### Module or chip used
ESP32-WROOM-KIT
### Debug Adapter
ESP32-WROVER-KIT
### OpenOCD version
v0.11.0-esp32-20220706
### Operating System
Linux
### Using an IDE ?
…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
On Windows 11, Chrome 116, I'm consistently receiving an error when attempting to use the recommended tool (https://devanlai.github.io/webdfu/dfu-util/) to upload firmware to the device.
```
Erasi…
-
### Development Kit
my PCB
### Module or chip used
ESP32-C3-MINI-U
### Debug Adapter
USB built-in JTAG
### OpenOCD version
v0.11.0-esp32-20211220
### Operating System
Win 11
### Using an IDE…
-
Extracted out of #2 and #3.
Loading the `multizone-sdk` test application to the board with OPENOCD currently fails with output:
```sh
Open On-Chip Debugger 0.11.0+dev-01860-g9aa8bab63-dirty (2021-0…